Table of Contents
Madefree Breakout ADXL335 +-3g 3-AXIS Accelerometer
This is a breakout board of the Analog Device Accelerometer ADXL335.
The ADXL335 is a small, thin, low power, complete 3-axis accel- erometer with signal conditioned voltage outputs.
The product measures acceleration with a minimum full-scale range of ±3 g.
It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Dimension: 15.5×12.5mm
Pinout
| Pin 1 | Vcc | Power Breakout 1.8V-3.6V |
| Pin 2 | X | Analog out X axis |
| Pin 3 | Y | Analog out Y axis |
| Pin 4 | Z | Analog out Z axis |
| Pin 5 | ST | Self Test |
| Pin 6 | GND | Signal ground |
Schematics
Link
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Noncommercial-Share Alike 3.0 Unported
