Table of Contents
Madefree Breakout Digital Humidity Temperature Sensor SHT15
This is a breakout board of the famous sensor Sensirion SHT1x.
SHT1x is Sensirion’s family of surface mountable relative humidity and temperature sensors.
The sensors integrate sensor elements plus signal processing on a tiny foot print and provide a fully calibrated digital output.
A unique capacitive sensor element is used for measuring relative humidity while temperature is measured by a band-gap sensor.
The applied CMOSens® technology guarantees excellent reliability and long term stability.
Dimension: 19x19mm
Pinout
| Pin 1 | Vcc | Power Breakout 2.4V-5.5V |
| Pin 2 | SDA | 2wire Data Signal |
| Pin 3 | SCL | 2wire Clock Signal |
| Pin 4 | GND | Ground Signal |
| R1 | SDA Pull-up Resistor (0603 or 0805 packages) | |
| R2 | Force SCL Pull-down Resistor (0603 or 0805 packages) | |
Schematics
Link
Except where otherwise noted, content on this wiki is licensed under the following license:CC Attribution-Noncommercial-Share Alike 3.0 Unported
